DLS - Performance CAD11

only £529.99 FREE Delivery

  • Delivery: See Delivery Terms
  • Code: Performance CAD11


CAD11, now in a new exclusive design, but the inside is of the same high quality as before. CAD11 is a powerful mono amplifier with a nominal power of 1050 Watts in 1 ohm load. In 4 ohm load the output is 400 Watts, and in 2 ohms 750 Watts. CAD11 is a digital class D amplifier. Built-in variable low pass filter 15 - 150 Hz. Variable subsonic filter 15-50 Hz with 24 dB slope. Adjustable bass boost 0- +18 dB. Built-in phase control variable 0-180 degrees. With the remote control you can adjust the level from your front seat. Built-in protection circuits shut down the amplifier in the event of overloads. Built-in fan to prevent from overheating. Can be connected in bridge mode together with a second CAD11.

Specification

Number of channels1
Amplifier classD
Typical power in 4 ohm400 W (0,4% THD)
Typical power in 2 ohm750 W (0,7% THD)
Typical power in 1 ohm1050 W (1% THD)
Mono bridge mode 4 ohmN/A
Damping factor>100
S/N ratio, A-weighted>100 dB
Input sensitivity0,15 - 5 V
Input impedance>10 kohm
Input impedance, high level100 ohm
High pass filterN/A
Low pass filter15 - 150 Hz / 24 dB
Subsonic filter15 - 50 Hz / 24 dB
Frequency range15 Hz - 160 Hz
Grand bass filter0 - +18 dB @45 Hz
Remote base level control1
Integrated fan1
High level input with auto start1
Power consumption (idle)1,5 A
Power consumption (max)120 A
Rec. power cableMinimum 2AWG / 33 mm2
Fuses4 x 30 A
Weight5,8 kg / 12,8 lb
Dimension (W x D x H)70 x 444 x 268 mm / 2,92 x 17,48 x 10,55 "