HIFONICS - XX COLOSSUS 2

only £899.99 FREE Delivery


  • Delivery: 1-2 Days
  • Code: XX COLOSSUS 2


Generation XX Amplifier Highlights


The variable subsonic's filter is operational between 10 Hz and 150 Hz on all Competition XX Super-A/B Class amplifiers and between 10 Hz and 50 Hz on all Competition XX Ultra D-Class amplifiers.

"Freq" adjusts the Hi-Pass and Low-Pass/Band-Pass feature. A Bandpass is created using both Low-Pass and Subsonics settings. Use of "X1" or "X10" switch shifts the frequency by a factor of 10, e.g., 40Hz shifts to 400Hz. This switch is also used to adjust LP or BP.

"Phase Shift" corrects phasing errors such as those caused by off-center positions relative to a speaker location. Phase corrections acoustically focus your ears to be the audio center when not centered to the actual speaker. Properly used, Phase Shift eliminates phase distortions cause by mismatched speaker combinations and/or those distortions inflicted by the vehicles acoustical abnormalities and compromised speaker locations. The end result, time aligned "coherent sound" and no listening fatigue.

Select Gen XX amplifiers can be Link & Sync'ed together so the audio-chs can be controlled from one set of crossovers in the master/slave mode. This feature allows bridging two amplifiers to one subwoofer.

Bass Boost controls the amount of bass boost to +18 dB, at the desired center frequency. Q-Control sets the width of the frequency range affected by the Boost setting.

Balanced Line Input, improves the source S/N Ratio which is often degraded by long cable runs. (requires optional Balanced Line Driver device) This option stepsup the audio input voltage from a 0.4 volts level to a maxx of 18-volts. It's like adding nitrous to your car.


Specification


  • XX Colossus II Dual Mono-Block Ultra D-Class Amplifier Design

  • 2 x 1600-Watts RMS @ 1-Ohm or

  • 3.2-kiloWatts/1 x 3200-Watts RMS @ 2-Ohm
The amplifier kit avalible as an option is the best kit for this amplifier. All the ratings have been compared and matched.