JL AUDIO - TR650-CSi

only £119.99 FREE Delivery

  • Delivery: See Delivery Terms
  • Code: TR650-CSi
  • Link: Item Manual
Call in store for details...


TR650-CSi Component Systems Specifications:
  TR650-CSi Component Systems
Description: Evolution™ TR 6.50 in. / 165 mm 2-Way Component Systems
6.50 in. / 165 mm Woofer; 0.50 in. / 12 mm Tweeter, Grilles Included. Perfect fit in many U.S. and European vehicles.
This speaker system is a perfect fit for many GM cars and European cars that accept a true 6.50-inch speaker. Multiple hole patterns are incorporated into the basket for hassle-free installation into virtually all vehicles that accommodate this size speaker.
Woofers: Injection-molded, mica-filled, polypropylene cone body, 1.0 in. / 25 mm voice coil, flat-profile/ symmetrical-roll spider, butyl rubber surround.
Tweeters: 0.50 in. / 12 mm textile dome diaphragm, integral phase plug, neodymium magnet, ferrofluid cooled and damped. Designed for flush or surface mounting.
Crossover Networks: Natural roll-off low pass (woofer), 1st order high-pass circuit with electrolytic capacitor on tweeter. Polyswitch tweeter protection.
Continuous Power Handling: 50W Continuous
System Efficiency: 91.0 dB @ 1W/1m
System Nominal Impedance: 4 ohms
System Frequency Response: 59 Hz - 22 KHz ± 3 dB
NOTES:
 
TR650-CSi Component Systems Physical Specifications :
JL Audio Component
WOOFER PHYSICAL SPECIFICATIONS
Woofer Frame Outer Diameter* (A) 6.50 in. / 165.0 mm
Woofer Grille Tray Outer Diameter** (B) 6.75 in. / 171.4 mm
Woofer Magnet Outer Diameter (C) 3.15 in. / 80.0 mm
Frontal Coaxial Tweeter Protrusion*** (D) N/A
Woofer Frontal Grille Protrusion**** (E) 0.85 in. / 21.5 mm
Woofer Mounting Hole Diameter (F) 5.56 in. / 141.3 mm
Woofer Mounting Depth (G) 2.44 in. / 61.9 mm
*Does not take into account mounting tabs
**Does not take into account logo badge
***Frontal coaxial tweeter protrusion measured from mounting surface
****Frontal grille protrusion measured from mounting surface

JL Audio Component
Tweeter PHYSICAL SPECIFICATIONS
Flush Mount Fixture Diameter (A) 1.79 in. / 45.5 mm
Flush Mount Trim-Ring Diameter (B) N/A
Flush Mount Mounting Hole Diameter (C) 1.55 in. / 39.3 mm
Flush Mount Mounting Depth (D) 0.60 in. / 15.2 mm
Surface Mount Fixture Diameter (E) 1.84 in. / 46.6 mm
Surface Mount Protrusion (F) 1.08 in. / 27.5 mm